No Sweat Stainless Steel Connectors
Quick and easy softener
and filter installations.

No More Soldering Pipes

Installation Kit For Fleck Water Softeners

Installation Kit 3/4" Flexible Stainless Steel Tubes with Fittings from Falcon Stainless, Inc.

Two 18" Flexible Stainless Steel tubes with 3/4" female NPT fitting on each end.
Two 7/8" Compression Adapter Fittings ( our part number fs78cf ).
Two 3/4" Di-Electric Nipples ( that you may or may not need

Comes with Installation Instructions on back.

Also, see details of our part fs78cf for details on how to attach to copper pipes without the need to solder any fittings.
* 304 Series Corrugated Stainless Steel
* Ease of Installation Saves Time & Money
* No Rubber or Plastic Hose to Reduce Flow
* Largest Inner Diameter for required GPM
* No Deformity in Curvature Will Hold Bend
* Manufactured to US Military/Aerospace specifications
* Re-Usable and Re-Bendable
* Stronger & More Flexible Than Copper
* Falcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/Aquaflo
* Will Not Discolor, Corrode Or Rust
* No Galvanic Effect No Dielectric Union Needed
* Lifetime Warranty (Against Mfg Defect)
* All Fittings Chrome Plated Solid Brass
* Will Not Crimp or Kink
* Burst Pressure Rated Up To 2200 psi
* High Temp EPDM Washer (40 to 300 degrees F)
* 100% Leak Tested
 

Installation kit for Ge Logix Water Softeners

A pair of 3/4" I.D. Flexible Stainless Steel Adapters having a total length of 18" made to work with all GE Osmonic Autotrol By Passes ( those used on 155, 255, 163, 168, 263, 268, etc ) and Valves.

Comes with 2 flexible Falcon Stainless Steel tubes having large Autotrol Adapter Nuts on one end with rubber gaskets and 3/4" female NPT on the other.
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 ) directly or to any Autotrol By Pass.
Can be used with the older Autotrol 155 By Pass and the newer 255 By Pass valves.
Also works on By Pass valves for the 163, 168, 263, and 268 Series.

Makes for easy installation to pipes having 3/4" male NPT connections.
Use with a 7/8" brass compression fitting ( our part # fs78cf ) to connect to copper piping with no soldering of pipes required.
See details for the fs78cf for more information on just how easy this product is to use.

Features


* 304 Series Corrugated Stainless Steel
* Ease of Installation Saves Time & Money
* No Rubber or Plastic Hose to Reduce Flow
* Largest Inner Diameter for required GPM
* No Deformity in Curvature Will Hold Bend
* Manufactured to US Military/Aerospace specifications
* Re-Usable and Re-Bendable
* Stronger & More Flexible Than Copper
* Falcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/Aquaflo
* Will Not Discolor, Corrode Or Rust
* No Galvanic Effect No Dielectric Union Needed
* Lifetime Warranty (Against Mfg Defect)
* All Fittings Chrome Plated Solid Brass
* Will Not Crimp or Kink
* Burst Pressure Rated Up To 2200 psi
* High Temp EPDM Washer (40 to 300 degrees F)
* 100% Leak Tested