CARBON FILTERS FOR HEALTHIER BETTER TASTING WATER AND REDUCTION OF UNDESIRABLE ODORS
One of the most common
applications for Activated Carbon is
the removal of the undesirable taste present in many chlorinated
water supplies. This taste is the result of the formation
of chlorophenols, often present in raw waters which contained
phenols and were subsequently treated with chlorine.
These phenols are usually the product of industrial wastes.
Even 0.1 ppm of chlorophenols can result in an undesirable
taste. Activated Carbon has for many years been successful in
the absorption of orthochlorophenol and the removal of free
chlorine from water supplies. The end product is clean, fresh
water with no objectionable tastes.
Activated Carbon is an outstanding material for applications requiring taste, odor, chlorine and color removal from water with suspended matter present. This product can be used for filtering waters having a wide range of pH levels.
These carbon filters use an up-flow NON-ELECTRIC clack valve making backwash unnecessary.
1.0 CUBIC FOOT CARBON FILTER 5 TO 7 GPM
THIS COMPLETE CARBON FILTER COMES WITH:
9 x 48 Structual mineral tank
1" clack upflow valve
appropriate amount of activated carbon
20 pounds of 1/4" bedding gravel
1/05" od pilot
1.5 CUBIC FOOT CARBON FILTER 8 TO 11 GPM
THIS COMPLETE CARBON FILTER COMES WITH:
10 x 54 Structual mineral tank
1" clack upflow valve
appropriate amount of activated carbon
20 pounds of 1/4" bedding gravel
1/05" od pilot
These carbon filters use a Fleck 5600 backwashing Filter valve.
FLECK 5600 AUTOMATIC ACTIVATED CARBON FILTER
THIS COMPLETE CARBON FILTER COMES WITH:
1.0 CUBIC FEET OF ACTIVATED CARBON
(9X48) MINERAL TANK
BYPASS
COMPLETE SYSTEM (10X14X56)
5600 TIMERED AUTOMATIC CONTROL VALVE
WATER SOFTENER REPLACEMENT RESIN AND ACTIVATED CARBON REPLACEMENT MEDIA
Toll Free 1-877-477-5452
Check out our customer feedback.
Copyright © Aplus Water LLC 2007